Reference Data · Victoria

MUZ: the state default, and every council that departs from it.

Mixed Use Zone, Clause 32.04. State default height 13.5 m. 5 councils set 6 values in schedule. As at 2026-08-05.

The zone code alone does not tell you the controls. MUZ carries a Victoria Planning Provisions default of 13.5 m under Clause 32.04, but each council writes numbered schedules (MUZ1, MUZ2, …) that can set their own figures. Across Victoria, 5 councils depart from the default in 6 places — heights from 9 m to 21 m . Everything not listed below inherits the state figure.

Council-set maximum heights in MUZ (6)

CouncilScheduleHeightvs defaultOrdinance
Glen Eira MUZ2 10.5 m -3 m Cl.
Glen Eira MUZ3 10.5 m -3 m Cl.
Greater Bendigo MUZ2 11 m -2.5 m Cl.
Monash MUZ4 21 m +7.5 m Cl.
Warrnambool MUZ2 14 m +0.5 m Cl.
Whittlesea MUZ2 9 m -4.5 m Cl.

How to read this

Every value above is set in a council's own schedule to Clause 32.04 and is linked to the ordinance it comes from. A council absent from these tables applies the state default for that parameter — that is Victoria's number, not the council's, and this page does not restate it per council for that reason.

Schedules are read and verified from the source planning scheme ordinance. Planning schemes are amended continuously; this page reflects the bundle as at 2026-08-05.

This information is provided for research and preliminary screening only. It does not constitute professional planning, legal or architectural advice. Which schedule applies to a given parcel — and what else affects it — depends on the site.

Find which MUZ schedule applies to an address

Zone, schedule, overlays and permit triggers for a specific parcel. Free, no signup.

Screen an address →

Other zones: RLZ · GRZ · NRZ · LDRZ · RGZ · all reference data