Reference Data · Victoria

Mildura: what the planning scheme actually sets.

3 council-set control values across 11 residential zone schedules. Verified from the ordinance on 2026-07-03, at amendment VC312. As at 2026-08-05.

The zone code is not the answer — the schedule is. Two GRZ1 sites in different Victorian councils can carry different minimum lot sizes, because each council writes its own schedule to the state zone. Mildura varies 3 control values from the Victoria Planning Provisions default across its 11 residential schedules. Those are listed first; everything else inherits the state number, which is stated as such rather than presented as this council's.

What Mildura sets in schedule (3 values)

ScheduleZoneControlCouncil-set valueOrdinance
NRZ1 Neighbourhood Residential Minimum lot size 1800 m² Cl.
LDRZ2 Low Density Residential Minimum lot size 4000 m² Cl.
RLZ1 Rural Living Minimum lot size 10000 m² Cl.

These are the numbers that differ from the state default. A site in one of these schedules is assessed against the value above, not the VPP figure.

All 11 residential zone schedules

Every parameter below is marked council-set (written into this council's schedule) or state default (inherited from the Victoria Planning Provisions). A state default is Victoria's number, not Mildura's.

ScheduleZoneControlsOrdinance
GRZ1
All parameters 'None specified' in schedule.
General Residential
Cl. 32.08
Maximum building height: 11 m (state default)
Minimum lot size: 300 m² (state default)
Garden area: 35% (state default)
Maximum site coverage: 65% (state default)
Cl.
NRZ1
Schedule specifies 1,800sqm minimum subdivision area.
Neighbourhood Residential
Cl. 32.09
Maximum building height: 9 m (state default)
Minimum lot size: 1800 m² (council-set)
Garden area: 35% (state default)
Maximum site coverage: 60% (state default)
Cl.
RGZ1
All parameters 'None specified' in schedule.
Residential Growth
Cl. 32.07
Maximum building height: 13.5 m (state default)
Minimum lot size: 200 m² (state default)
Garden area: 0% (state default)
Maximum site coverage: 70% (state default)
Cl.
LDRZ1
Schedule specifies 'None specified' for min lot — VPP default 0.4ha applies.
Low Density Residential
Cl. 32.03
Minimum lot size: 4000 m² (state default)
Cl.
LDRZ2
0.4ha (4000sqm) for Cabarita, Irymple, Merbein, Mildura (Lake Hawthorn, Flora Avenue).
Low Density Residential
Cl. 32.03
Minimum lot size: 4000 m² (council-set)
Cl.
TZ1
Smaller towns within Mildura municipality. All parameters 'None specified'.
Township
Cl. 32.05
Maximum building height: 13.5 m (state default)
Cl.
MUZ1
Added via VC308 monitor. VPP defaults assumed — needs Playwright verification.
Mixed Use
Cl. 32.04
Maximum building height: 13.5 m (state default)
Cl.
MUZ2
Added via VC308 monitor. VPP defaults assumed — needs Playwright verification.
Mixed Use
Cl. 32.04
Maximum building height: 13.5 m (state default)
Cl.
MUZ3
Added via VC308 monitor. VPP defaults assumed — needs Playwright verification.
Mixed Use
Cl. 32.04
Maximum building height: 13.5 m (state default)
Cl.
MUZ4
Added via VC308 monitor. VPP defaults assumed — needs Playwright verification.
Mixed Use
Cl. 32.04
Maximum building height: 13.5 m (state default)
Cl.
RLZ1
Minimum subdivision area 1 ha (Cl 35.03 schedule, source-verified 2026-07-03).
Rural Living
Cl. 35.03
Maximum building height: 9 m (state default)
Minimum lot size: 10000 m² (council-set)
Cl.

How this was compiled, and how far to trust it

All 11 schedules here were read and verified from the Mildura planning scheme ordinance by a person. Last verified 2026-07-03. Current to amendment VC312.

Planning schemes are amended continuously and this page reflects the bundle as at 2026-08-05. Values shown as state defaults are the Victoria Planning Provisions figure for that zone — correct unless and until Mildura writes a schedule value, which is exactly what the first table records.

This information is provided for research and preliminary screening only. It does not constitute professional planning, legal or architectural advice. Always verify with Mildura before making decisions.

Check a specific address in Mildura

These are the scheme-wide numbers. Which schedule applies to a given parcel — plus its overlays and permit triggers — depends on the site. Screen one free, no signup.

Screen an address →

Compare across the state: minimum lot sizes · height limits · all reference data