Reference Data · Victoria

Hume: what the planning scheme actually sets.

2 council-set control values across 7 residential zone schedules. Verified from the ordinance on 2026-07-03, at amendment VC312. As at 2026-08-05.

The zone code is not the answer — the schedule is. Two GRZ1 sites in different Victorian councils can carry different minimum lot sizes, because each council writes its own schedule to the state zone. Hume varies 2 control values from the Victoria Planning Provisions default across its 7 residential schedules. Those are listed first; everything else inherits the state number, which is stated as such rather than presented as this council's.

What Hume sets in schedule (2 values)

ScheduleZoneControlCouncil-set valueOrdinance
NRZ1 Neighbourhood Residential Minimum lot size 2700 m² Cl.
LDRZ Low Density Residential Minimum lot size 6000 m² Cl.

These are the numbers that differ from the state default. A site in one of these schedules is assessed against the value above, not the VPP figure.

All 7 residential zone schedules

Every parameter below is marked council-set (written into this council's schedule) or state default (inherited from the Victoria Planning Provisions). A state default is Victoria's number, not Hume's.

ScheduleZoneControlsOrdinance
GRZ1
Hume Residential Areas. All 'None specified' = VPP defaults. Garden area NOT exempt. Via C238hume. 		General Residential
Cl. 32.08
Maximum building height: 11 m (state default)
Minimum lot size: 300 m² (state default)
Garden area: 35% (state default)
Maximum site coverage: 65% (state default)
Cl.
NRZ1
Rolling Meadows. 2700sqm minimum subdivision area (schedule). Height/coverage/garden = VPP defaults. Via C217/C238hume. 		Neighbourhood Residential
Cl. 32.09
Maximum building height: 9 m (state default)
Minimum lot size: 2700 m² (council-set)
Garden area: 35% (state default)
Maximum site coverage: 60% (state default)
Cl.
RGZ1
Residential Growth Areas. All 'None specified' = VPP defaults. Via C207. 		Residential Growth
Cl. 32.07
Maximum building height: 13.5 m (state default)
Minimum lot size: 200 m² (state default)
Garden area: 0% (state default)
Maximum site coverage: 70% (state default)
Cl.
LDRZ
Single unnumbered schedule. Rolling Meadows 0.6ha minimum. Via C238hume. 		Low Density Residential
Cl. 32.03
Minimum lot size: 6000 m² (council-set)
Cl.
TZ
Hume Townships. Single unnumbered schedule. All 'None specified' = VPP defaults. Via C238hume. 		Township
Cl. 32.05
Maximum building height: 13.5 m (state default)
Cl.
MUZ
Added via VC304 monitor. VPP defaults assumed — needs Playwright verification. 		Mixed Use
Cl. 32.04
Maximum building height: 13.5 m (state default)
Cl.
RLZ
Cl 35.03-3 statutory 2 ha default — no minimum subdivision area specified in schedule (source-verified 2026-07-03). 		Rural Living
Cl. 35.03
Maximum building height: 9 m (state default)
Minimum lot size: 20000 m² (state default)
Cl.

How this was compiled, and how far to trust it

All 7 schedules here were read and verified from the Hume planning scheme ordinance by a person. Last verified 2026-07-03. Current to amendment VC312.

Planning schemes are amended continuously and this page reflects the bundle as at 2026-08-05. Values shown as state defaults are the Victoria Planning Provisions figure for that zone — correct unless and until Hume writes a schedule value, which is exactly what the first table records.

This information is provided for research and preliminary screening only. It does not constitute professional planning, legal or architectural advice. Always verify with Hume before making decisions.

Check a specific address in Hume

These are the scheme-wide numbers. Which schedule applies to a given parcel — plus its overlays and permit triggers — depends on the site. Screen one free, no signup.

Screen an address →

Compare across the state: minimum lot sizes · height limits · all reference data